GT-1612-MTBD
GPS&Beidou Receiver Module
www.gotop-zzu.com
Page 25 of 35
Revision: V2.0.1-January 2015
4.4. Electrostatic Discharge
GT-1612-MTBD module is an ESD sensitive device. ESD protection precautions should still be emphasized.
Proper ESD handling and packaging procedures must be applied throughout the processing, handling and operation of
any application.
The ESD bearing capability of the module is listed in the following table. Note that you should add ESD
components to module pins in particular applications.
Table 13: ESD Endurance Table (Temperature : 25°C, Humidity: 45%)
4.5. Reliability Test
Table 14: Reliability Test
Pin
Contact Discharge
Air Discharge
RF_IN
±5KV
±10KV
Patch Antenna
±5KV
±10KV
VCC
±5KV
±10KV
UART
±3KV
±6KV
Others
±2KV
±4KV
Test Item
Conditions
Standard
Thermal Shock
-30°C...+80°C, 144 cycles
GB/T 2423.22-2002 Test Na
IEC 68-2-14 Na
Damp Heat, Cyclic
+55°C; >90% Rh 6 cycles for 144 hours
IEC 68-2-30 Db Test
Vibration Shock
5~20Hz, 0.96m2/s3; 20~500Hz,
0.96m2/s3-3dB/oct, 1hour/axis; no function
2423.13-1997 Test Fdb
IEC 68-2-36 Fdb Test
Heat Test
85°C, 2 hours, operational
GB/T 2423.1-2001 Ab
IEC 68-2-1 Test
Cold Test
-40°C, 2 hours, operational
GB/T 2423.1-2001 Ab
IEC 68-2-1 Test
Heat Soak
90°C, 72 hours, non-operational
GB/T 2423.2-2001 Bb
IEC 68-2-2 Test B
Cold Soak
-45°C, 72 hours, non-operational
GB/T 2423.1-2001 A
IEC 68-2-1 Test
