Hardware Development Guide
All Rights reserved, No Spreading without GOSUNCN Permission 34
ME3630 mini-PCIE
ME3630 mini-PCIE
6
RF
A
NTENNA
D
ESIGN
G
UIDE
The antenna connection is one of the most important aspect in the full product design as it strongly affects the product
overall performances, hence read carefully and follow the requirements and the guidelines for a proper design.
6.1
A
NTENNA
I
NTERFACE
The Mini PCIE adapter is equipped with three RF antenna connectors: the main antenna interface, GPS antenna interface
and Diversity antenna interface, as shown in Figure 6-1. The antennal connector employs the U.FL-R-SMT1 (80) RF console
from HRS Corporation, as shown in Figure 6-2. For the specified cables on the RF interface, it is recommended to use
U.FL_LP_088 of HRS Corporation, as shown in Figure 6-3. Profile Dimensions of RF antenna console is shown in Figure 6-4
(Unit: mm).
For more information about mating connectors visit the website
http://www.hirose-connectors.com/.
Figure 6–1 Antennal Interface Diagram
Figure 6–2 RF Interface Testing Console (U.FL-R-SMT1 (80) of HRS Corporation)