Caution. Make sure that when operating this desk after assembly that no objects are in the
path of the desk when it is being raised or lowered. Please also ensure any power cord used is of
sufficient length for the travel of the desk. Failure to ensure complete assembly and to also take
adequate care when using the desk could result in injury to persons and property.
Should this desk be re-sold please ensure these instructions are passed to the buyer.
In the event that any screws, power cables, allen keys or any other components or fasteners
are missing from the box when opened please contact GoStand Limited at the contact details below.
This desk is an electrical device. Keep liquids away from the electrical control box.
Do not open any of the electrical components, legs or handset. Risk of electric shock.
The desk should not be sat on nor operated with a person on the desk
Pinch point. Keep small childrens fingers away from the lifting legs.
This product has a duty cycle of 10%. 2 mins on 18 mins off.
In the event of loss of mains power a manual reset may be required
www.gostand.co.uk
For help email: [email protected] Page 1 of 7
We carry spares for all our desks so if your desk is not functioning contact us and we can have
replacement parts dispatched to you normally within 24 hours.
GoStand Series 1 dual motor Sit-Stand desk
Assembly Instructions
