English
Clamp Multimeter METRACLIP 86
5 MAINTENANCE
The instrument has no parts that can be replaced by personnel who are not trained
and approved. Any non-approved repair or other work, or replacement of a part by
an "equivalent", may severely compromise safety.
5.1
CLEANING
•
Disconnect everything connected to the device and set the switch to OFF.
•
Use a soft cloth moistened with soapy water. Rinse with a damp cloth and
dry quickly using a dry cloth or forced air.
•
Dry perfectly before putting back into use.
5.2
REPLACEMENT OF THE BATTERY
The
symbol indicates that the battery is spent. When this symbol appears on
the display unit, the battery must be replaced. The measurements and
specifications are no longer guaranteed.
To replace the battery, proceed as follows:
1. Disconnect the measurement leads from the input terminals.
2. Set the switch to OFF.
3. Use a screwdriver to unscrew the screw securing the battery compartment
cover to the back of the housing and open the cover (see §
4. Replace the battery (see §
5. Close the cover and screw it to the housing.
5.3
METROLOGICAL CHECK
Like all measuring or testing devices, the instrument must be checked regularly.
This instrument should be checked at least once a year. For checks and
calibrations, contact one of our accredited metrology laboratories (information and
contact details available on request), at our GOSSEN METRAWATT subsidiary or
the branch in your country.
5.4
REPAIR
For all repairs before or after expiry of warranty, please return the device to your
distributor.
49
