Gossen MetraWatt M281A, Руководство по эксплуатации, Страница: 30 / 40

26
METRACABLE TDR PRO
Gossen Metrawatt GmbH

Your logo has been saved to the PC.
1. Select Cable Measurement from the menu.
The Load Measurements dialog appears.
2. Click the Settings button in the Print Options panel.
The print options dialog appears.
3. Select your logo file in the Logo Image for Report Header in the Print Options field.
4. Acknowledge by clicking OK.

The selected logo is then printed in all reports.
Selecting Print Options
Before printing reports, a printer must be selected and options must be specified with regard
to format, the footer and the signature field.

A printer has been connected and installed to your PC.
1. Select Cable Measurement from the menu.
The Load Measurements dialog appears.
2. Click the Settings button in the Print Options panel.
The print options dialog appears.
3. Select either the Portrait or Landscape format.
4. Activate or deactivate the Footer (filename) option.
5. Activate or deactivate the Signature option.
6. Select which printer will be used from the Printer list.
7. Acknowledge by clicking OK.

The print settings are saved.
Viewing, Evaluating, Saving and Exporting Measurements and Generating Reports
1. Import the measurement data to the software.
If the data are imported directly from the instrument, several measurements are dis-
played. Select the window with the desired measurement.
If the data are imported as a file from the PC, only one measurement is displayed


24.
2. Specify the desired excerpt from the TDR trace:
– : Excerpt from the TDR trace. Select the desired excerpt by clicking into the TDR
trace and marking the desired range with the mouse pointer while pressing and
holding the left mouse key.
– : Entire TDR trace.
3. Insert 1 or 2 cursors into the TDR trace in order to display the absolute position of the
event and/or to measure the distance between two events (optional). Click to this
end and then click into the TDR trace with the left mouse key in order to insert the blue
cursor, and with the right mouse key in order to insert the red cursor. If only one cursor is
inserted into the trace, it’s absolute position is displayed. If a second cursor is inserted,
distance between the two cursors is additionally displayed.
4. Optional: Enter the customer’s name or company to the Customer field, for whom the
measurement has been performed.
5. Optional: Enter additional information concerning the customer to the Comment field.