Gosafe G606, Руководство пользователя

Страница: 14 / 30

Configuration Software User Manual
6. Power Save Mode (PSM): only when the upload time is larger than 15mins, device goes
into power save.
7. Power Save Setting (PSP): Setting the threshold. There are GPS and GSM two ways.
4.1.2
．
Device-Hardware
1. Enable/Disable Movement Sensor (MOT): The system can enable disable the movement
sensor.
Note: The upload modes are depended on movement sensor. If the movement sensor is
disabled the user will not receive “Move Alarm” and also the system will keep one
upload mode.
2. Movement Sensor Setting (MTP): Vibrate duration is used when vehicle is in stop status
and judge vehicle from stop to move. Stop duration is used to when vehicle is in moving
status and judge vehicle from move to stop. The movement sensor parameters are to
set the sensitivity of the movement sensor. Here we have three parameters