manualshive.com logo in svg

Gorgy Timing LEDI NETWORK TDS V1, Руководство пользователя, Страница: 62 / 68

Поделиться
Скачать
Gorgy Timing LEDI NETWORK TDS V1 Скачать руководство пользователя страница 62

62

MDE-LEDI-NETWORK-TDS-4099V1.0

8.2. MICROCONTROLERS REPLACEMENT 

Tools: 

 

►

Torx T15 screwdriver: front face (rack) or top plate (case) 

 

►

Torx T10 screwdriver: lid (rack) + front face (case) + output cards

 

►

PLCC extractor: microcontroller

 

►

 

►

Gorgy Timing reference: CIS8951RC2P

 

►

Unplug every cable at the back of the product

 

►

Remove the four M3.5 screws from the front face

 

►

Remove the six M3 screws from the lid

 

►

Use the PLCC extractor to remove the microcontroller

 

►

Set in the new Microprocessor. Make sure to match the indexing slots

 

☛

On one side of the micro there is a dot (indicated by 1). The support 

arrow (indicated by 2) must be on the same side as the dot.

Note: the system has two indexing slots:  
The slanted angle of the micro must face one of the slanted corners of the 
support.. 

1

2

Содержание LEDI NETWORK TDS V1





































































Отзывы:

Нет отзывов