Instructions for Use
7
Change of door opening direction
To carry out this operation you will
require a flat head screwdriver, cross
head screwdriver, a wrench number 8
and a TORX wrench number 20.
•
It may be necessary to tilt the
appliance to screw or unscrew the
bottom hinge.
•
Be careful not to damage the
appliance, i.e. the condenser unit at
the rear of the appliance.
•
After unscrewing the hinges, hold the
doors to prevent them from falling off.
•
Exchange the position of door hinge
dowels and dowel covers on the top
side of both doors.
•
Door handles have various shapes,
depending on the model (
V
,
VI
).
On the bottom side of both doors
loosen the door opening stopper
screw, remove the door stopper and
tighten the screw back on. Save the
door opening stopper for eventual later
use.
On the newly selected hinge side
loosen the screw and use it to tighten
the door opening stopper, supplied
with the appliance.
•
From (Fig.
VII)
on continue the change
procedure in the opposite sequence.
Downloaded from Fridge-Manual.com Manuals