Mounting Instructions
5
Integrated Refrigerating and Freezing
Appliances EN
Mounting instructions for refrigerating and freezing appliances are for qualified
technicians only. Appliance should be mounted and installed in compliance with these
instructions, current standards and regulations. Mounting instructions were prepared
for various types/models of appliances, therefore they may describe some
procedures that do not apply to your appliance.
Mounting Dimensions and Required Air
Circulation.......................................................................5
Changing the Direction of Opening the Door...............6
Mounting the Appliance.................................................7
Mounting Dimensions and Required Air Circulation
The rear wall of the appliance is getting warm during the operation of the appliance (and water is
evaporating from the drain pan on the compressor). You must therefore provide for adequate air
circulation on the rear of the appliance.
•
At the base of the kitchen unit intended for building in the integrated appliance, there should be
at least 200 cm
˛
free space, for adequate air circulation.
•
On the upper part of the appliance the air is coming out, so try not to cover the opening for the
outflow air.
A (mm)
B (mm)
875
875-880
1025
1025-1030
1225
1225-1230