5
Instructions for Use
Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regularly
ventilated room. Allowed ambient temperature
depends on the model (class) of the appliance
and is stated on the rating plate of the
appliance. Never place the appliance near heat
emitting devices (e.g. cooker, radiator, water
heater or similar devices) and do not expose
it to direct sunlight. The appliance should be
positioned at least 3 cm away from the electric
or gas cooker and at least 30 cm away from
the oil or coal stove. If this is not possible,
use an appropriate insulation. Behind the
appliance there should be free space at least
200 cm2 wide and above the appliance the
high kitchen units should be at least 5 cm away
from the appliance in order to assure adequate
ventilation of the condenser unit.
Class
Ambient temparature
SN (subnormal)
from + 10°C to + 32°C
N (normal)
from + 16°C to + 32°C
ST (sub-tropical)
from + 16°C to + 38°C
T (tropical)
from + 16°C to + 43°C
Connection to Power Supply
Connect the appliance with the cable and
plug to the power supply socket outlet with
a ground terminal (safety socket). Required
nominal voltage and frequency are indicated on
the rating plate. The connection to the mains
supply and earthing have to be made according
to current standards and regulations. The
appliance resists temporary voltage tolerance
up to -6 to +6%
How to wire a 13 amp plug.
Important
The wires in the mains lead on this appliance
are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue – Neutral
Brown – Live
As the colours may not correspond with the
markings identifying the terminals in your plug
proceed as follows.
The green and yellow wire must be connected
to the terminal in the plug which is marked
with the letter E or with the earth symbol or
coloured green and yellow.
The blue wire must be connected to the
terminal marked N or coloured black.
The brown wire must be connected to the
terminal marked L or coloured red.