Ensure the Appliance is unplugged and empty.
Adjust the two leveling feet to their highest position.
We recommend you have someone to assist you.
NOTE:
To take the door off it is necessary to tilt the Appliance backward.
You should rest the Appliance on something solid e.g.a chair just below the top panel.
Do not lay the Appliance completely fl at as this may damage the coolant system.
Tools required: socket wrench / spanner Nr. 8, slot and cross screwdriver
1. Disassemeble the screws behind the fi xed roof with cross-slot screwdriver and remove the
cover from the refrigerator.
2. Remove the screws fi xed the top-hinge (A) with cross-slot screwdriver.
3. Replace the top-hinge and the door limit block and the door bearing bush to the other side
a) replace the top-hinge.
b) replace the door bearing bush and the limit block.
4. Disassemble the screws fi xed the bottom-hinge (B) with cross-slot screwdriver and replace the
hinge to the other side then fi x it with screws
Note: the refrigerator incline angle less 45°.
5. Replace the leveler to the other side and adjust it to make sure the cabinet level.
6. Set the door right position,fi x the top-hinge and then the roof cover.
B
1.
2.
A
3.a.
3.b.
4.
5.
6.
7
Changing the door opening direction