Instructions for Use
71
Maintenance and Cleaning
Manual Defrosting of the Low
Temperature Compartment
When the frost and ice layer in the low
temperature compartment is 3-5 mm thick, you
should defrost it.
•
Turn the thermostat knob to
STOP (0)
position,
and disconnect the power supply.
•
Empty the compartment and put a suitable
vessel under the low temperature compartment
to collect the defrost water. Leave the door of
the compartment open to accelerate defrosting.
•
Avoid using defrosting sprays, as they may
cause damage to the plastic parts and may be
hazardous to health.
Cleaning the Appliance
Disconnect the power supply before cleaning
the appliance.
Do not use coarse or aggressive cleaning agents
as you can damage the surface.
Be careful to remove any cleanser agent
remaining after cleaning.
•
Clean the
exterior
with water and detergent.
Varnished surfaces are cleaned with soft cloth
and an alcohol based cleaning agent (for
example glass cleaners). You may also use
alcohol (ethanol or isoprophylic alcohol).
The application of abrasive and specially
aggressive cleaners, such as the stainless steel
cleaners, is not appropriate for the cleaning of
plastic and coated parts.
•
Wash the
interior
of the appliance with
lukewarm water, in which you added one or two
spoonfuls of vinegar.
•
Every now and then wipe the
condenser
on the
rear wall. Use soft non-metal brush or vacuum
cleaner.
After cleaning, connect the appliance to power
supply and reload it.
Switch Off the Appliance When
Not In Use
If you do not intend to use the appliance for a
longer period, set the thermostat knob to the
STOP (0)
position. Disconnect the power supply,
take out the foods and defrost and clean the
appliance. Leave the door slightly open.