Gorenje R090 Скачать руководство пользователя страница 10

Instructions for Use

72

 Trouble-Shooting Guide

During the service, you can come across some
troubles that in most cases result from improper
handling of the appliance and can easy be
eliminated.

The Appliance Fails to Operate After
Connecting to the Mains Supply

• 

Check the supply in the outlet socket and make
sure the appliance is switched on (thermostat
knob in operating position).

Continuous Operation of the
Cooling System

• 

The door was frequently opened or it was left
opened for too long.

• 

The door is not properly closed (the door may
sag, the gasket may be polluted or damaged).

• 

Perhaps you have overloaded the appliance
with fresh foods.

• 

The reason may be inadequate ventilation of
the compressor and condenser (assure
adequate air circulation and wipe off the
condenser).

Noise

Cooling in refrigerating-freezing appliances is
enabled by the refrigerating system with
compressor, which produces noise. How noisy
the appliance is depends on where it is placed,
how it is used and how old the appliance is.

• 

During the operation 

of the compressor the

noise of liquid is heard and when the
compressor is not operating, the refrigerant flow
is heard. This is a normal condition and it has
no influence whatsoever on the lifetime of the
appliance.

• 

After starting the appliance, 

the operation of

the compressor and the refrigerant flow may be
louder, which does not mean that something is
wrong with the appliance and it has no
influence on the lifetime of the appliance.
Gradually the noise is reduced.

• 

Sometimes 

unusual and stronger noise 

is

heard, which is rather unusual for the
appliance. This noise is often a consequence of
inadequate placing.

− 

The appliance shall be placed and levelled
firmly on solid base.

− 

It should not touch the wall or kitchen units
standing next to it.

− 

Check the accesories in the interior of the
appliance, they should be placed correctly in
their positions; also check the bottles, tins
and other vessels that might touch each other
and rattle.

WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO

INFLUENCE ON THE OPERATION OF THE APPLIANCE.

Содержание R090











Отзывы: