Instructions for Use
16
•
Unscrew the upper hinge fastener and fix it
on the opposite side of the appliance.
•
Take off, change and replace the door hinge
fixture and the fixture plugs.
•
Put the door with the upper hinge washer on
the upper hinge fastener.
•
Fix the lower hinge with washer on the new
position.
•
Replace the cover plate of the lower hinge to
the opposite side of the kick-plate and fix it
to the appliance.
•
In case your appliance is equipped with a
handle mounted on the side of the
appliance, take it off and replace it on the
other side.
•
Some screws are covered with caps. Take
them off before undoing the screws.
•
Check the gasket, it shouldn't be creased
and it should seal well.
Should the seal not adhere to the casing of the
appliance perfectly, it will have to be heated
from a suitable distance (by means of hair
drier, for example) and lightly stretched to the
required height.
1
Upper hinge fastener
2
Upper hinge washer
3
Lower hinge
4
Lower hinge washer
5
Kick plate or control panel
6
Cover plate of the lower hinge
7
Fixture plug of the door hinge
8
Door hinge fixture
Maintenance and Cleaning
Automatic Defrosting of the
Refrigerator
There is no need to defrost the refrigerator,
because ice depositing on the inner back wall
is defrosted automatically.
Ice is depositing on the inner back wall during
the compressor operation; later on, when the
compressor is not operating ice is defrosting
and water drops collect and drain through the
outlet in the inner back wall into the drain pan
situated above the compressor, from where it
evaporates.