Instructions for Use
15
Warning!
When storing longer bottles, install the rack on
higher position not disturbing the closing of the
door inner liner (vessels, bottles or food stored
in the door), however its positioning on guides
in the appliance is optional.
Defrost Water Outlet (2)
The interior of the refrigerator is cooled with
cooling plate incorporated in the rear wall.
Under the plate there is a channel and an
outlet for defrost water.
Regularly check the defrost water outlet and
the channel, because they should never be
clogged (as for example with food rests). If
clogged, use a plastic straw and clean it.
Illumination in the Interior of the
Refrigerator
Lamp for interior illumination will turn on when
the illumination switch situate in the inside of
the refrigerator is turnned on.
Lock (models with a lock)
The lock with a spring can be locked/unlocked
by slightly pressing the key turning it to the
left/right at the same time.
Operation Control
The appliance is controlled with thermostat
knob, situated in the right upper part inside the
appliance.
Turn the knob from
STOP (0)
position towards
7
and backwards.
Temperature Selection
•
Higher settings on the knob (towards
7
)
mean lower temperatures (colder) in all
compartments of the appliance. Temperature
in the interior of the appliance may even drop
below 0°C. Higher settings should be used
only in case higher temperature is
recommended or required.
•
When the ambient temperature is normal, we
recommend medium setting.
•
Changes of the ambient temprature affect
temperature in the interior of the appliance
(choose correct setting of the thermostat
knob).
•
In
STOP (0)
position the appliance does not
operate (the cooling system is switched off),
yet power supply is not interrupted (the light
is on, when you open the refrigerator door).
•
Temperature in the refrigerator also depends
on how often the door is opened.
Changing the Direction of Opening the Door
If you find the direction of opening the door on
your appliance inconvenient, you can change
it. Holes on the opposite side have already
been prepared in the factory.
•
Press the kick-plate downwards and draw it
to yourself.
•
Unscrew the lower hinge and take off the
door together with the upper hinge washer.