29
Getting ice
To get ice, push the cubed or crushed ice button as required. Then move your
glass down the dispenser lever in the suggested position and press it.
About 50mm
Suggested position
Suggested position
About 50mm
Making ice
To fi ll the ice bucket to maximum capacity after.
Installation, follow these steps:
1. Allow your refrigerator to operate and cooldown for 24 hours (or 1 full day).
Waiting 24 hours will allow your icemaker to cool properly.
2. Dispense 4 to 6icecubes into the glass.
3. Later, after 16 hours the ice maker can dispense a full glass of ice.
Warning:
Do not put food in the ice bucket. If you store food in the ice bucket, the food
can strike the icemaker when you open or close the door, causing damage to the
icemaker.
Note that the ice cubes in the ice bucket may spill out over the drawer. If this
occurs, be sure to clear the ice cubes that spilled out of the drawer.
• lf a power failure occurs, ice cubes may melt, and then freeze together when
the power comes back on, causing the dispenser to stop working·
• To prevent this problem, after a power failure, pull out the ice bucket and
residual ice or water.
NOTE:
• Don't push the water dispenser lever forward without a cup below since it may
cause water spilling.
• To avoid cold air leaking out from cabinet, keep the water dispenser parts still
be installed even if the water dispenser was out of use.