Stopping or changing a programme
If you want to change programme after starting the
dishwasher, open the door then press and hold
Start/Stop for three seconds. Add more detergent if
the lid of the detergent dispenser has opened. Then
choose a new programme, press Start/Stop and
close the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically.
Add the dishes, close the door and the dishwasher
continues the programme.
If the dishwasher is turned off using the main
power switch or due to a power failure
If the dishwashing programme was not finished, the
interrupted programme continues when power is
restored.
NOTE!
During drying, the programme is interrupted if the
power is cut or the door is open for more than 2
minutes.
8
After dishwashing
Once the programme has finished and the
door is opened "End" appears on the
display.
A buzzer also sounds at the end of the programme.
See the section Settings, which describes how to
change this function.
A status light also indicates the end of the
programme. See the section Dishwasher
components.
Once the dishwasher has finished, it uses only
standby power. Turn off the dishwasher using the
main power switch if you want to completely cut the
power. Turn off the water supply valve after each
use.
English 85
Dishwashing
Содержание GDV642X
