First Steps
basicCON 4121 – User Manual
3-3
3.3
Configuration
Before the capturing of frames is possible, the
basicCON 4121
needs
to be configured, according to the actually transmitted Video signal.
1.
Start the
GOEPEL electronic
LvdsViewer
software.
2.
Select the LVDS interface of the
basicCON 4121
by its name
seen in the HardwareExplorer (“LVDS1” in our example).
3.
Open the “Settings” dialog from the menu.
All settings regarding the
LvdsViewer
software as well as the
basicCON 4121
can be done in this dialog. For a description of
all settings see the separate manual of the
LvdsViewer
software.
For starters it is enough to import settings from a settings file.
4.
Click the “Import” button. A file dialog appears.
5.
Search and open the
Init4121_DS90UB926_v11.xml settings
file from the delivered driver and software compact disc.
The “Init files” on CD are only examples for the respective
interface modules configuration. Usually they do not fit to
your system. If necessary, read the manual of the LvdsViewer
tool to find the correct settings).
6.
If necessary change the resolution of the frames to be
captured, by setting the correct values in the “Height” and
“Width” fields.
Figure 3-2:
Interface Selection
Figure 3-3:
Settings Dialog