Hardware
2-8
basicCON 4115 – User Manual
Power supply with 8..25 VDC (and approx. 300 mA quiescent current
at 12V) is effected via the two
ext. Power Supply
banana females
(red = plus/ blue = minus, see Figure 2-3).
These females are used to supply the internal logic. In addition, the
blue female is connected with the GND connections of the USB and
LVDS interfaces.
Alternatively, the DC socket right to the females can be used for
power supply.
This DC socket has the following characteristics:
♦
Opening diameter 5.6 mm
♦
Center pin diameter 2.0 mm
♦
Outside ground
♦
Inside 8-25V
Please use the
ext. Power Supply
females OR the DC socket for
power supply.
The INAP125T24 and INAP375T serializers have an LVDS connector
with an additional power supply connection to supply the display or
the test object.
This power supply is effected via the two
Power DUT In
banana
sockets (red = plus/ blue = minus), located left on the front panel.
Addressing several
basicCON 4115
devices is effected exclusively via
their serial numbers: The device with the LEAST serial number has
always device number
1
.
2.4.3
Power
supply
2.4.4
Addressing
