User Manual
- Earbuds
- Charging Case
- Charging Cable
Setup Instruction:
1. Open the earbuds case and keep the earbuds inside.
2. Press and hold the paring button until the light starts pulsing.
3. Go to Bluetooth settings on your device and make sure the Bluetooth is on.
4.
Tape “Earbuds” and connect.
Charging:
Be sure the charging case is well ventilated when in use or charging. Using damaged
ear buds or charging case, or damaged cables or charging when moisture is present,
can cause fire, electric shock, injury, or damage to the product or other property. Using
damaged charging accessories may also cause damage to the device. When charging
the device using a power adapter, make sure the power adapter is plugged into a
socket near the earbuds and is easily accessible. Avoid charging the device in direct
sunlight.
This device is intended for use with a certified Limited Power Source (LPS) per IEC
60950-1 or classified PS1 per IEC 62368-1.
Only charge your earbuds with the included charging case and cable, or compatible
charging accessories. Failure to use compatible charging accessories can cause fire,
electric shock, injury, or damage to the device and the accessories. Compatible
charging accessories are available on the Google Store and at Google authorized
resellers (look for
Google’s “made for” badge).
Model Numbers: GPQY2, G7YPJ, G7T9J
Regulatory Information: United States
FCC REGULATORY COMPLIANCE
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
