8
User Manual V1.0-2022-08-20
03 Product Introduction
Waiting mode
Self-check mode
Burning Mode
Faulty mode
Grid-Tied mode
3.4 Inverter Operation Mode
No.
Parts
Description
1
Waiting
mode
Waiting stage after the inverter is powered on.
• When the conditions are met, it enters the self-check mode.
• If there is a fault, the inverter enters the fault mode.
• If a burning request is received, the inverter enters the burning mode.
2
Self-check
mode
Before the inverter starts up, it continuously performs self-check,
initialization, etc.
• When the conditions are met, it enters the grid-tied mode, and the
inverter starts on grid connection.
• If a burning request is received, the inverter enters the burning mode.
• If the self-check is not passed, it enters the fault mode.
3
Grid-Tied
mode
The inverter is grid-tied successfully, making energy conversion and
controlling the power in PV systems.
• If a fault is detected, it enters the fault mode.
• If a burning request is received, the inverter enters the burning mode.
4
Faulty
mode
If a fault is detected, the inverter enters the fault mode. When the fault is
cleared, it enters the wait mode.
5
Burning
Mode
When the inverter is upgrading the program, it enters the burning mode.
•
When the upgrading is finished, it enters the waiting mode.
