Goodwe ES Скачать руководство пользователя страница 1

Страница: 1 / 6

Goodwe ES nad EM Firmware Updating Guide:

1. Please read instructions carefully before updating.

2. Please Note EM inverters may be damaged when updating with PV on.

3. Please do not Use the EZ flash if the unit has the most current version on:

The firmware update for Goodwe ES and EM is EZ flash (master and slave 1515) Data send 08.

For EM is EZ flash (master and slave 0404) Data send 08.

The new ES inverters (shipped after march 2019) will not require EZ flash update only the Data

send.

Equipment needed:

•

• Laptop or PC

•

• USB male to male cable

•

• EZFlash (program)

•

• Data Send (Program)

The USB cable can be purchased at any Matrix store

Содержание ES

Страница 3: ...lease NOTE please Note EM inverters may be damaged when updating with PV Remove the Wi Fi dongle from the inverter during updates The USB port on the ES inverter is under the panel marked Meter Unscrew the four screw and remove the panel The USB port on the EM inverter is under the Wi Fi antenna Connect computer and inverter with the male to male USB cable ...

Страница 4: ...STEP 3 Open the EzFlash program ARM box should be selected Click on select file and choose the appropriate files ...

Страница 5: ...set complete The update process should not be interrupted The update will run through the master cpu will update first The Slave cpu will then update Once the updates have complete successfully the system will reset On reset complete you can close the EzFlash application and proceed to step 3 to update ARM firmware ...

Страница 6: ...lease ensure USB Open Success when connected to inverter and the grid and loads are switched off Just have one DC source on the inverter Find the tool DataSend exe you will need this to update the ARM firmware 2 Select the file for upadate first button shown below 3 Run the update as shown below Wait for the Update to complete ...