Set the FUNCTION switch to RADIO select MW or FM using BAND SELECT switch and tune to the
required station(refer to radio operation section). Insert a cassette into the deck and press the
RECORD button.
Press the CASS. STOP / EJECT button to stop recording. The CASS. PAUSE button can be used to
stop recording for short intervals. Press the CASSETTE F.FWD to fast forward the tape, press the
CASSETTE REWIND button to rewind the tape.
Set the FUNCTION switch to CD. Select the required tracks to be recorded. Insert a cassette into
the cassette deck and press the CASS. RECORD button.
Press the CASS. STOP / EJECT button to stop recording.
When the tape reaches the end in either PLAY or RECORD mode, the built-in AUTO STOP
system will release the depressed PLAY, RECORD keys. Only the cassette function is brought
automatically to a stop , the RADIO or CD PLAYER will continue to play.
The use of only good quality cassettes (IEC TYPE1) for making recordings is recommended,
other types of cassette may be used but it is unlikely to make proper recordings on these more
specialised tapes. The use of C120 cassettes is not recommended in this machine.
Normally, anything recorded on the tape is automatically erased when new recording is made.
It is possible to protect your recordings from accidental erasure by removing the tabs found on
the rear of the cassette.
Recording From Radio
Recording From CD
Auto Stop
Type Of Cassettes
Protecting Recordings
13
Gently clean the tape head and pinch-wheel / capstan assemblies after every 10 hours of use
until all traces of oxide deposit have been removed. A range of cassette care products are
available from all good audio retailers.
Care Of Cassette Mechanism
RECORD/PLAY HEAD
CAPSTAN
ERASE HEAD
PINCH ROLLER
