
UltraSweep
TM
Traveler
Instruction Manual
Engine-mounted rodent repeller to protect parked vehicles
Protects
Repels
Included Parts
Getting Started
Safety Precautions
Sold Separately
POWER CORD
WITH FUSE
ULTRASWEEP
TM
TRAVELER
4 CABLE TIES
OPTIONAL
LED FLASHING LIGHTS
•
Cars, trucks, RVs, boats, small planes, ATVs, and other
parked vehicles.
•
Read entire manual before use
•
Before installation, ensure both the repeller and your vehicle engine are turned OFF
•
Mount the repeller so that the speaker is facing into the engine area
•
Never run wires along hot pipes or hoses
•
Use strong high-temperature double sided tape or the included cable ties for mounting
•
Do not let the wires sag; keep them secured with the included cable ties alongside existing wiring
•
Do not mount the device below the engine where it might be exposed to water
•
Keep away from children
•
Do not use near small animal pets such as rabbits
•
Do not place your ear next to the device
•
Do not open the device, or use it near water
•
Before powering the device “on”, check cable-to-battery polarity (red to positive, black to negative)
•
Periodically confirm that the device and all wires are secure and not touching any hot pipes or hoses
•
Mice, rats, chipmunks, squirrels, and other small rodents.
The UltraSweep
TM
Traveler will work automatically when your engine stops, and will go into standby mode when the engine is
running. It has two white flashing LEDs and one middle red/green LED that displays each power mode.
STANDBY MODE
When your engine is on, the repeller will automatically detect the vibration and go into a standby state. The
red LED
will flash
every 5 seconds to indicate standby mode.
WORKING MODE
Once the engine stops, the UltraSweep
TM
Traveler will go into working mode. After 120 seconds the red LED will turn green. The
repeller will run in
Quiet Mode
for 3 minutes. Then it will go into
Super Mode
for 80 seconds (if you have the optional LED strands
attached, they will flash every 5 seconds while the device is in Super Mode). The UltraSweep
TM
Traveler will continue to alternate
between Quiet and Super Modes to prevent pests from adapting to the frequencies and flashing lights.