16
3. Connect the outputs of the source devices such as HD-
DVD, PS3, etc. to the inputs (9) of the Ultra HDMI™ Matrix
4 x 2 by HDMI™ cable.
4. Connect the inputs of the HD output devices to the outputs
(8) of the Ultra HDMI™ Matrix 4 x 2 by HDMI™ cable.
5. Alternatively or additionally, you can connect audio output
devices also on optical output (Toslink, 10) or coaxial audio
output (RCA, 11) for digital transmission of signals or on
analogue audio output (RCA, 12) for analog transmission of
signals.
6. Connect the included power supply (14) with the DC socket
(13) of the Ultra HDMI™ Matrix 4 x 2 and then to a mains
socket.
Fig. 6:
Connecting
4.2 Operation
- Press the ON/OFF switch to turn on the matrix.
a) Selection via selection button
For outputs A and B there are separated selection buttons
available for source devices 1-4.
- Select the desired output by pressing the corresponding
button A / B (6).
If a source device is detected, the corresponding LED lights up
red on the display (4).
- Press the selection button again to switch to the next input
channel.
The selection of the input signal and it´s source device 1 - 4
takes place in a cyclic order: