6
Method B: Software Operation
System Requirement and Precautions
1. Whenever power off VW-1404ZH, please stay unpowered at least 5 to 10 seconds to allow power
capacitors to discharge.
2. The VW-1404ZH provides software control program which runs under Microsoft Windows 98, 2000,
XP, 7, 8 through the interface of USB virtual com control.
3. Before you click on the icon of the software, make sure you have secured the connection between
your computer USB port and the VW-1404ZH.
Start the software control program
Executing the control software, the following dialog will pop up. It has two ways to control the VW-1404ZH
device (under Microsoft Windows 7, please run as administrator).
1.
USB Connection: Use USB to connect the port on device and computer. Select correct virtual COM port and
click the OK button.
2.
Ethernet Connection: Enter the device IP address and click the OK button.
After the software control setting is accomplished, it will enter directly to the control interface.
1
2
3
4
6
7
8
5
