7
Mounting GoMax
GoMax provides mounting holes on the back and on three sides of the unit. Although you
can mount GoMax using any of these holes and in any orientation, to avoid overheating, LMI
recommends the following:
• The ventilation holes should be kept free of obstructions. (There are two vents on opposite
sides of the unit.)
• The intake vent (larger vent with 18 holes and anti-dust mesh) should be at the bottom.
LMI provides DIN rail clips to mount GoMax on a DIN rail. Note the recommended orientation
(smaller vent at the top) in the following illustration:
You can also mount the GoMax unit directly to a frame. All mounting holes are specified as M4X0.7
- 6H, with a thread depth of 3.65 mm. The same recommendations for orientation and mounting
points still apply if you mount GoMax directly to a frame.
