19
ART 7 LITE/G2+ MONITOR
Settings "guard monitor" mode:
The monitor/s to be configured as a guard monitor/s (up to 4 monitors) in the building, must be
configured with
and as
,
,
or
. Then enter the special code
address 1
master slave 1 slave 2
slave 3
'
' in a master monitor (see special codes on pages 20 to 23), the monitor/s with address 1 will
5001
be now a guard monitor/s with
and displaying the symbol
at the top right of the
address 129
main menu screen.
The access door panel will auto-configure the
on the sound
Note:
button P1
module with the
.
call address 129
Operation of the "guard monitor":
-The master and slave monitor(s) receive the call from the access door panel (by pressing button P1
on the sound module).
-The master and slave guard monitor(s) can be autoswitch-on with the access door panel.
-
receives calls from the apartments (by pressing the button below
Only the master guard monitor
icon
on the main menu of the apartment monitor).
-The master and slave guard monitor(s) can be used to call the apartmets (intercom menu).
-It allows internal intercommunication between the guard monitors.
Guard monitor main menu screen
In the main menu monitor/s of the apartments, the icon
of call to guard monitor will be displayed.
Press the button below the icon
to make a call to the guard monitor.
Important: Only the master guard monitor will receive the call from the apartment.
Main menu monitor/s of the apartment
SETTINGS AND OPERATION OF THE GUARD MONITOR