Goldwing 76in EDGE540 30-35CC, Руководство пользователя

Страница: 45 / 53

FINAL RADIO SYSTEM INSTALLATION
Whether you use 72 MHz systems or the newer 2.4 GHz systems, correct radio installation and care is vital to
the safe and reliable operation of your aircraft. Follow the manufacturer’s instruction for installation guidance
of receivers and batteries paying attention to factors such as vibration isolation, adequate cooling, and
clearances.
1. Mount your receiver(s) securely in a location which provides a clean and maintenance free solution to
your setup. All servo wires should be neatly routed and secured in place so they will not come loose or
flop around during flight.
2. The fuselage ply sides provide space to mount your switches just below the canopy. Mount your
switches according to the manufacturer’s instructions and route your wires safely and securely as
above.
3. Your receiver battery(s) can be mounted in a variety of locations depending on your balance needs.
Regardless of where you mount your batteries it is vital that they are very secure with no possibility of
coming loose. Use double sided Velcro to hold the batteries from sliding around and then use zip ties
or Velcro straps to secure them tightly in place.
4. Servo and battery leads are the life blood of your aircraft. Make sure all wires are top quality and
connectors are tight and display no loose pins or frayed wires. Servo clips are provided in the kit for
your convenience. These servo clips can even be glued to the wood structure using CA if desired.
5. Check all radio programming and control surface operations thoroughly before your initial flight.
Check your radio range according to the radio manufacturer’s instructions both with the engine off and
running.