User Manual – GOLDMUND Epilogue 2 – 7
4
ASSEMBLING
THE SPEAKER FEET
NOTE:
This is for users who will NOT use the Epiframe 1. The Epiframe 1 is an external structure holding an
Epilogue 2 and an Epilogue 1 together. This accessory is sold separately.
•
First put the speaker on its side on the floor. Use a soft cushion to avoid damaging it.
•
Screw the long pointed bar in the threading accessible in the speaker’s bottom plate after
removing the big screw used for shipment. Tighten as much as you can.
•
Take the 2 transparent acrylic feet and assemble them to the back of the Epilogue 2 speaker,
each with 2 washers and screws. Do not over-tighten the screws to avoid cracking the acrylic.
•
Lift the Epilogue 2 speaker and put it on its feet. Adjust the leveling screw of each acrylic foot
to properly level each Epilogue 2 speaker.
•
You will now be ready to put the Epilogue 1 on top of the Epilogue 2.
•
Use the transparent acrylic small blocks to receive the back of the Epilogue 1.
•
The pointed bar assembled previously on the bottom of the Epilogue 1 must be set in the
gliding row engraved on the top silver plate of the Epilogue 2.
NOTE:
The short pointed bar is for mounting
on the bottom of the Epilogue 1. You
have to assemble it to the bottom of
the Epilogue 1.
