The SuperSwivel
™
is intended for use with GoldenEar Technology
SuperSat
®
Speakers,
3D Array
®
Soundbars, or similar loudspeakers with
1
⁄
4
-20
threaded
receptacles. Each bracket can support up to 11 lbs (5.0 kg). Do not use
a single bracket with any speaker weighing more than 11 lbs (5.0 kg). Use
one (1) SuperSwivel™ brackets with the
SuperSat 3, 3C, 50
and
60
(
for
vertical mounting
). Use two (2) SuperSwivel™ brackets with the
SuperSat
50C, 60C
and the
3D Array
Soundbars.
GoldenEar Technology
'
P.O. Box 410
'
Stevenson, MD 21153
'
410-998-9134
'
www.goldenear.com
Step 2
Fasten the ball pivot to the
1
⁄
4
-20 threaded
receptacle on the back of the loudspeaker.
Tighten the ball pivot nut using a
7
⁄
16
"(11mm)
wrench. (
NOTE: For Mounting SuperSat 50 and
60 in vertical orientation with one SuperSwivel,
use the upper insert.
)
ball pivot nut
'
SuperSwivel
™
Universal Mounting Bracket
User’s Guide
ball pivot
clamping screw
Step 1
Loosen the
clamping screw
with
supplied
Allen
(hex)
wrench
until the ball pivot
slides out.
Be
careful
not
to fully r
emove
the
clamping
hex
screw.
Step 3
1. Using the wall plate as a template, mark the two screw-hole positions
on the wall where you wish to mount the bracket.
2. Mounting holes in the bracket will fit #10 screws (not included). Secure
the bracket to the wall using a minimum of two screws.
Installation
