Golden Tornado 4-CYLINDER Скачать руководство пользователя

Страница: 13 / 18

MOUNT HYDRAULIC CYLINDER(S)
cont.

Note: Ensure Hydraulic Cylinder(s) are tightly fastened as
described in previous step before continuing.

Align the upper Hydraulic Cylinder mounting hole with the
corresponding holes on the H-Frame as shown in Figure 12
& 13.

Note: The H-Frame may need to be lifted and rotated upward to
allow proper alignment.

Insert one (1) 3/4” Cylinder Pin into the cylinder mounting

plate through the Hydraulic Cylinder upper mounting hole
as shown in Figure 13.

From the inside of the mounting plate, insert one (1) 3/8” Hex

Bolt through the mounting plate and the hole on the Cylinder
Pin shown in Figure 13.

Attach one (1) 3/8” Lock Washer and one (1) 3/8” Hex Nut to

the protruding end of the Hex Bolt and fasten with
appropriate wrench until secure as shown in Figure 13.

Repeat these steps for the remaining three (3) Hydraulic
Cylinders.

PARTS REQUIRED TO MOUNT HYDRAULIC

CYLINDER(S)

Hydraulic Cylinder (4)

3/8” Lock Washer (4)

3/8” Hex Nut (4)

3/8” x 4

1/2” Hex Bolt (

3/4” Cylinder Pin (4)

Figure 12

Figure 13

Содержание Tornado 4-CYLINDER



















Результаты поиска

Содержание Tornado 4-CYLINDER

Отзывы:

Похожие инструкции для Tornado 4-CYLINDER

Бренды по названию

Популярные бренды

Golden Tornado 4-CYLINDER, Руководство по установке

Результаты поиска

Содержание Tornado 4-CYLINDER

Отзывы:

Похожие инструкции для Tornado 4-CYLINDER

Бренды по названию

Популярные бренды