Golden Tornado 4-CYLINDER Скачать руководство пользователя

Страница: 10 / 18

MOUNT STERN SIDE H-FRAME

Note: For this step, ensure the Stern Side H-Frame is being used.

Note: Hinge Bushings are preinstalled on Side Beam.

Align the mounting holes on the Stern Side H-Frame hinge
plate with the Hinge Bushings located on the Side Beam as
shown in Figure 8.

Note: Stern Side H-Frame should be oriented so that the Cylinder
Mounting Cross Support overhangs the stern side Cross Beam as
shown in Figure 7.

Insert one (1) 1/8” Cotter Pin into one (1) 3/4" x 5” Hinge Pin,

bending the tines of the Cotter Pin outward and apart,
securing the Cotter Pin within the Hinge Pin.

Attach a Lollipop Washer to the open end of the Hinge Pin.

Slide the Hinge Pin through the hinge plate as shown in
Figure 8.

Insert one (1) Lollipop Washer and one (1) 1/8” Cotter Pin into

the protruding end of the Hinge Pin, bending the tines of the
Cotter Pin outward and apart, securing the Cotter Pin within
the Hinge Pin.

Repeat this step for the opposite side of the Stern Side H-
Frame.

PARTS REQUIRED TO MOUNT STERN SIDE

H-FRAME

Stern Side H-Frame

Lollipop Washer

(4)

1/8” Cotter Pin (4)

3/4” x 5” Hinge Pin

(2)

Figure 8

Figure 7

Содержание Tornado 4-CYLINDER



















Результаты поиска

Содержание Tornado 4-CYLINDER

Отзывы:

Похожие инструкции для Tornado 4-CYLINDER

Бренды по названию

Популярные бренды

Golden Tornado 4-CYLINDER, Руководство по установке

Результаты поиска

Содержание Tornado 4-CYLINDER

Отзывы:

Похожие инструкции для Tornado 4-CYLINDER

Бренды по названию

Популярные бренды