Страница 1: ......
Страница 2: ...slack If the cables go slack be sure to realign and tighten the cables before lifting the boat Keep hands clear of moving parts Do not exceed the rated capacity Boat lifts are not intended for lifting humans Do not operate the boat lift without a G F C I The lift must be wired by a licensed electrician Inspect and lubricate all grease fittings periodically Inspect the cables before each use The bo...
Страница 3: ...able 4 It is required that these cables be replaced every 2 to 3 years 5 Inspect all electrical cable and connections Be sure the ground fault interrupter is operable Reconnect tighten any loose connections and promptly replace any frayed or damaged wiring NOTE Sacrificial anodes must be maintained and an electrical disconnect including neutral and ground must be provided or warranty will be null ...
Страница 4: ...s and the center of gravity on your boat Always place the center of gravity of your boat directly in the CENTER of your cradle beams Please consult with your installer for assistance and proper placement of your boat on the lift See illustration below for further instructions on loading your GatorVator Boat Lift Golden Manufacturing Inc 17611 East Street North Fort Myers Florida 33917 ...
