Golden Dragon XML6125CLE, Руководство по ремонту

Страница: 225 / 613

7.
Use the tools only with hubs where
wheel studs have already been installed.
Use 5870.610.010 [Assembly fixture] and
5870.610.002 [Insert] to install the wheel
studs.
Fig. 140
8. Press small bearing outer ring into hub until
contact is obtained using
5870.058.051 [Driver tool] and
5870.260.002 [Handle].
9. Press large bearing outer ring into hub until
contact is obtained using
5870.058.089 [Driver tool] and
5870.260.002 [Handle].
Fig. 141
10. On the variant with grease in the hub, install 200 g of grease in the tapered roller bearing in acc.
with ZF List of Lubricants TE‑ML 12. Press grease also from outside into the space between bearing
inner ring and bearing cage.
11. Place bearing inner ring in hub.
Fig. 142
Assembly
88 EN 4474.751.104a - 2018-06 4-88