MACHIAVELLI GOLD MKII
OWNERʼS MANUAL
MACHIAVELLI GOLD MKII
OWNERʼS MANUAL
RED (right ch. +)
GREEN (right ch. -)
WHITE (Left ch. +)
BLUE (Left ch. -)
Fig. 2
il suono italiano
GOLD NOTE
il suono italiano
GOLD NOTE
Method of Use
1. Mounting the cartridge on the tone arm Head-Shell
using the supplied Allen Wrench and one set of the
2,5mm screws. Adjust it to the stylus position specified
for the turntable system you are using mounting it
properly without tilting or turning it. (See Figure 1.)
• The output terminals are colours coded for identifi-
cation as illustrated in Figure 2. Match the colors of
the tone arm head-shell leads to the terminals and
connect each other properly.
NOTE:
When connecting the cartridge, be sure to use the
tipped leads and press them onto the terminals. Apply-
ing heat to the output terminals of the cartridge, such
as in direct soldering, will cause internal damage to the
cartridge, such as wire breakage.
Package Content
• Cartridge body
• Stainless Steel no-magnetic two sets of head-shell fixing 2,5mm screws
• 2mm Allen Wrench
• Ownerʼs Manual
cartridge will result in it being attracted by the magnet and may result in damage to the stylus, so care must be taken.
2.
A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver or other such item near the
cartridge with the utmost care.
1.
The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a finger can break it. Handle the
Before Using
Read these Operating Instructions carefully before using your MACHIAVELLI GOLD MKII and keep it for future reference.
Thank you for your purchase of the MACHIAVELLI GOLD MKII stereo cartridge.
RED (right ch. +)
GREEN (right ch. -)
WHITE (Left ch. +)
BLUE (Left ch. -)
Fig. 2
x2
Fig. 1
x2
Fig. 1
x2
Fig. 1
Method of Use
1. Mounting the cartridge on the tone arm Head-Shell
using the supplied Allen Wrench and one set of the
2,5mm screws. Adjust it to the stylus position specified
for the turntable system you are using mounting it
properly without tilting or turning it. (See Figure 1.)
• The output terminals are colours coded for identifi-
cation as illustrated in Figure 2. Match the colors of
the tone arm head-shell leads to the terminals and
connect each other properly.
NOTE:
When connecting the cartridge, be sure to use the
tipped leads and press them onto the terminals. Apply-
ing heat to the output terminals of the cartridge, such
as in direct soldering, will cause internal damage to the
cartridge, such as wire breakage.
Package Content
• Cartridge body
• Stainless Steel no-magnetic two sets of head-shell fixing 2,5mm screws
• 2mm Allen Wrench
• Ownerʼs Manual
cartridge will result in it being attracted by the magnet and may result in damage to the stylus, so care must be taken.
2.
A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver or other such item near the
cartridge with the utmost care.
1.
The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a finger can break it. Handle the
Before Using
Read these Operating Instructions carefully before using your MACHIAVELLI GOLD MKII and keep it for future reference.
Thank you for your purchase of the MACHIAVELLI GOLD MKII stereo cartridge.
