The Lemonator
Model No. 5314
Page 5
gmpopcorn.com
OPERATING INSTRUCTIONS
1.
Place the unit on a smooth, level surface and attach it with the suction cups.
2.
Put the Lemon Squeezer Bowl and one of the Cone options in place and ensure they
are in the correct orientation (see image below). Use the solid cone for juice with no
seeds; use the cone with holes to allow some seeds and pulp to pass through.
3.
Place a cup or bowl under the unit to catch the juice that will be made.
For a small cup:
Put Cup Holder in the DOWN position and set the cup on the holder.
For a large cup:
Put Cup Holder in the UP position, to allow the cup to fit under the unit.
4.
Place a lemon half (with the cut side down) onto the Lemon Squeezer Cone.
5.
Remove hands and fingers from the squeeze area and all other moving parts before
attempting to lower the handle.
6.
Lower the handle and apply pressure to squeeze the juice from the lemon half.
7.
Guide handle back to open position before releasing a grip on the handle (springs on
the guide rods allow handle to remain in the open position).
8.
Remove all rind and remaining seeds before repeating the process.
Lemon Squeezer Cone
Lemon Squeezer Bowl
Push Block
Thumb Screws
(attach
Push Block to Guide)
Guide
Cup Holder
(shown in DOWN
position for use with smaller cups)