Gold Medal PopClean Elite Popper 600 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 65

Gold Medal PopClean Elite Popper 600 Series Скачать руководство пользователя страница 5

Instruction Manual - Touch Screen

2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)

PopClean Elite Popper -600 Series

2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions)

Page 5

gmpopcorn.com

INSTALLATION INSTRUCTIONS

Inspection of Shipment

After unpacking, check thoroughly for any damage which may have occurred in transit. Claims

should be filed immediately with the transportation company. The warranty does not cover

damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control (reference warranty in back of manual).

Manual

Instruction Manual (Part No. 110241) and Parts Manual (Part No. 110242) are provided with

each unit. The manuals cover -600 Series PopClean Elite Poppers beginning with the Model
Series shown below and features a Touch Screen Control Panel:

2011, 2848, 2860, 2872,

and

2873

(for 32 oz. Pop-O-Golds)

2911, 2948, 2960, 2972,

and

2973

(for 52 oz. Medallions)

The Instruction Manual contains initial setup, installation, and operating instructions for the unit.

Read and understand the Instruction Manual and all other safety instructions before using this

equipment. To order copies of the Instruction Manual (Part No. 110241) or Parts Manual (Part

No. 110242), go to gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862.

The Parts Manual contains maintenance and spare parts information intended for qualified

service personnel only; it is not intended for the operator. Qualified service personnel must use

the Parts Manual in combination with the Instruction Manual when servicing the unit for all
installation, operating, cleaning, maintenance, and spare parts replacement information.

Keep the manuals accessible, local inspectors may need to reference the information when
inspecting the popper unit.

This manual covers units with a Touch Screen Control Panel

«
...
3
4
5
6
7
...
»

Содержание PopClean Elite Popper 600 Series


































































Отзывы:

Нет отзывов