Instruction Manual - Touch Screen
2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)
PopClean Elite Popper -600 Series
2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions)
Page 24
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
MAIN POWER SWITCH
Two position, ON/OFF rocker switch - supplies power to the display, sign, and interior
cabinet lights. LED switch light ON indicates there is power to these features. (Twin
Models have an additional left hand side Power Switch and Touch Screen to control the
LH Kettle, LH Oil Unit, and LH Filter System.)
CIRCUIT BREAKERS
Two mini Circuit Breakers are located on the control panel, to protect the popper unit from
an overload condition. If unit is plugged in, but the kettle agitator or oil system does not
come on when activated, then the circuit breaker(s) may be tripped. (Reference the
Troubleshooting section of this manual).
USB PORT
Used for updating software and to upload/download information for the machine ONLY.
This
is NOT a charging port!
TOUCH SCREEN CONTROL PANEL
The Touch Screen Control Panel provides easy screen navigation through popper functions
to pop popcorn and adjust unit settings. Reference Introduction to the Touch Screen
Control section on the next page for a basic description of the equipment and controls.
MANUAL PULL (for Fire Suppression System
–
some Exports excluded)
Pull Station for the operator to manually activate the Fire Suppression System.
Note:
In the event of a fire, the system will automatically activate the Fire Suppression
System; however, if the operator chooses, they can operate the system by pulling
the manual pull.
Control Panel View
Fire Suppression Manual Pull
(if equipped)
Circuit Breakers
Touch Screen Control
USB Port
(this is
NOT
a charging port)
Main Power
Switch