Instruction Manual - Touch Screen
2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)
PopClean Elite Popper -600 Series
2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions)
Page 20
gmpopcorn.com
Filter System Error Code Explanation Table
After changing a filter(s) or correcting a filter system error code,
turn the Power Switch OFF
then back ON to reset the display screen.
Error Code
Display View
Explanation - Solution
Error Code 10
Check Filter
E10
Error: Check Filter
(Filters need to be cleaned
soon.)
Indicates pressure switch detects Box and HEPA Filter
efficiency is reduced to less than 80%. Unit will still operate
but have replacement filters available for use when needed.
•
Press
(OK) to return to cooking screen.
•
Otherwise, error screen goes away when cooking screen
advances to the next phase.
Error Code 11
Change Filters
Change Filters
Air filters need to be
changed!
Indicates pressure switch detects Box and HEPA Filter
efficiency is reduced to less than 75%. When a Change Filter
error is displayed,
THE FILTER SYSTEM AND THE KETTLE
HEAT WILL NOT OPERATE
until the Box and/or HEPA Filters
are changed.
If the Change Filters error occurs during a popping cycle, THE
FILTER SYSTEM AND KETTLE HEAT ARE SHUT OFF AND
COOKING IS STOPPED.
•
Press
(OK) to go to Settings screen (for service
technician or manager only, passcode required to access
additional screens).
•
Otherwise, turn machine OFF, change the Box and HEPA
Filters, then turn machine back ON. Reference the Updraft
or Downdraft Filter section accordingly.
Error Code 12
Filter Door Open
E12
Error: Filter Door open
(Turn machine OFF and
check filter door on top of
machine. If problem
persists, call Service.)
Indicates the Filter Door interlock switch is NOT engaged.
•
Press
(OK) to go to Settings screen (for service
technician or manager only, passcode required to access
additional screens).
•
Otherwise, turn machine OFF, fix issue as noted below, then
turn machine back ON.
To fix a Filter Door issue
(reference the Updraft or
Downdraft Filter section accordingly)
:
•
Make sure the door is closed so the door tab engages
the interlock switch.
•
Make sure
EACH
compression knob is fully twisted
clockwise to lock it in place.
Error Code 13
Baffle Filter
E13
Error: Baffle Filter
(Turn machine OFF and
verify baffle filter is in
place. If problem persists,
call Service.)
Indicates the Baffle Filter is not installed, or the interlock
switch is NOT engaged.
•
Press
(OK) to go to Settings screen (for service
technician or manager only, passcode required to access
additional screens).
•
Otherwise, turn machine OFF, install the baffle filter or
make sure it engages the interlock, then turn machine back
ON. Reference the Updraft or Downdraft Filter section
accordingly for instructions on filter installation.