Golbong 2643-62, Руководство по эксплуатации и установке, Страница: 50 / 69

50
Setup the FTP server:
1. In the "Main"
, Enter the “Device Config” , Click icon “Network”
.
2.
Click the “FTP”
3.
Mark the check box “Enable”.
4. Fill in the FTP information including server IP, Port, username, password.
5.
Click “OK” to save.
Important: The FTP upload only will activate when the alarm event is detected, such as motion detection,
external alarm detection. The camera can not continuous upload the snapshot to a ftp server.