44
Enable Motion recording
1. In the "Main"
, Click “Device Config” , enter “Video Detect”, a new screen appear.
2. Click the enable to turn on the motion detection.
3.
Choose sensitivity level from “Sensitivity”.
Important: Over sensitivity could cause much more false alarm.
4.
Click the “Region”, Mark the interested area with blue block.
NOTE: The blue block is selected area.
5. Click Period, a new dialog pop up. Customize the schedule to activate the motion detection,
click OK to save.
Содержание 2643-62
Страница 69: ...69 Copyright GOLBONG 2017...
