WG600S Industrial Basic Variable-Speed Peristaltic Pump
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
RS_W
Figure 19. Logic Level Control with Internal 12V Power Source
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
12VDC
VCC_W
COM
RS_W
Figure 20. Logic Level Control with External 12V Power Source
2) Turn on the power switch. The LED display will be on.
3) Press
SPEED ADJUST
dial to change the mode to Logic
Level Control Mode.
4) Rotate the
SPEED ADJUST
dial to adjust the speed to
desired value.
5) Change
DIRECTION
switch position to desired rotating direction.
6) When RS_W switch is closed, the drive will be running; when RS_W
switch is open, the drive will stop.
7) Change
DIRECTION
switch to the middle position to stop the drive
anytime.
6.7
Communication Mode (L)
The RS485 interface supports standard MODBUS protocol. The pump can
be controlled by external device via the communication port. Please refer to
H215
13
