Golander
BT103S Manual
22
work
power voltage is provided.
3. Check the connections of the
communication board.
7
Hardware
Noisy when
running
Check the screws and level on
pump head to make sure they are
secure.
9
Software
External
control does
not work
Check if pump is on External
Control Mode.
10 Software
RS485 does
not work
right
1. Check if the display shows the
communication is ready.
2. Reset the address of the pump.
3. Check whether on the bus there
are two pumps using the same
address
If the problem cannot be solved, please contact the
manufacturer or distributor.
9
Dimensions
Figure 28. Dimensions
(mm)
