Golander
BT103S Manual
7
4.2.5
E. Keypad Lock Status
It shows the state of the keypad lock. When the keypad is locked,
only the
START/STOP
key will work. On the main screen, press and
hold the
DIRECTION
key to lock the keypad; press and hold the
START/STOP
key to unlock the keypad.
Keypad unlocked
Keypad locked
Figure 7. Keypad Lock
4.2.6
F. Communication State
It shows the current RS485 Modbus communication state.
#1
Communication
disconnected
Connected, pump
number is set to 1
Figure 8. Communication state
4.2.7
G. Rotating Speed State
It shows the current rotating speed, rpm. When the drive is running
at full speed (prime), the display will be
>>>>>>>.
5
Parameter Settings
On the main screen, press the
MENU
key to enter the setting menu,
and press
UP
or
DOWN
key to change the
value, press
START/STOP
key to enter the submenu, then press
MENU
key
again to confirm the setting. To return the main screen, press and
hold the
MENU
key or press the
MENU
key
a few times until it goes
back to the main screen