Excess flow device SBS
Regler- und Armaturen-Gesellschaft mbH & Co. KG
Obernbreiter Straße 2-
16 •
97340 Marktbreit / Germany
Tel.: +49 9332 404-
0 • Fax: +49 9332 404
-43
E-Mail: info@gok-
online.de •
Internet: www.gok-online.de
10 / 10
Close all free connections in the feed lines of the LPG system tightly with a
suitable cap to prevent gas from flowing out.
DISPOSAL
To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.
TECHNICAL DATA
TECHNICAL DATA LOW PRESSURE
Nominal pressure
29; 50; 70 - 200 mbar
Nominal flow rate
max. 12 kg/h
Maximum admissible pressure PS
16 bar
Ambient temperature
-20 °C to +50 °C
Housing material
Brass CW617N
TECHNICAL DATA MEDIUM PRESSURE
Nominal pressure
0.3 bar to 4.0 bar, fixedly adjusted
Nominal flow rate M
g
max. 30 kg/h
Maximum admissible pressure PS
16 bar
Ambient temperature
-20 °C to +50 °C
Housing material
Brass CW617N or zinc die-casting
ZP0410
TECHNICAL DATA HIGH PRESSURE
Nominal pressure
6.0 bar to 10.0 bar, fixedly adjusted
Nominal flow rate at 6 bar
10 kg/h to 12 kg/h
Nominal flow rate at 10 bar
12 kg/h
Maximum admissible pressure PS
16 bar
Ambient temperature
-20 °C to +50 °C
Housing material
Brass CW617N
For additional technical data or special settings, see type label of the product!
WARRANTY
We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.
TECHNICAL CHANGES
All the information contained in this assembly and operating manual is the result of product
testing and corresponds to the level of knowledge at the time of testing and the relevant
legislation and standards at the time of issue. We reserve the right to make technical changes
without prior notice. Errors and omissions excepted. All figures are for illustration purposes
only and may differ from actual designs.
