In-ear
Wireless Sport Headphones
Instruction Manual
GINBT14
Safety Warnings
Long-term exposure to loud
music may cause hearing
damage. It is best to avoid
extreme volume when using
earphones, especially for
extended periods.
The manufacturer is not
responsible for any radio or
TV interference caused by
unauthorized modifications
to this equipment. Such
modifications could void the
user’s authority to operate the
equipment.
• For traffic safety, do not use
earphones while driving or cycling.
• Avoid listening to sound at high
levels for prolonged periods of
time. This may be harmful to you
and may cause hearing loss.
• The socket outlet that is installed
near equipment must be easily
accessible.
• Do not use device in the
environment of too high or too
low temperature, never expose the
device under strong sunshine or
too wet environment. The suitable
temperature for the device and
accessories is 0
°
C - 45
°
C.
• This device complies with R&TTE
Directive 1999/5/EC. Operation
is subject to the following two
conditions: (1) this device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
Unpacking
Remove all items from the packaging. Retain the
packaging. If you dispose of it please do so according to
local regulations.
The following items are included:
Main Unit
Ear Hoops
USB Charging
Cable
Ear Caps
Instruction
Manual
Instruction
Manual
Product Overview
1. Ear cap
2. button
• Switch the
headphones on/off
• Multi-functional
3. Charging socket
4. Ear Hoop
5. Status indicator
6. – button
Decrease volume or
go to previous track
7. Noise reduction mic
8. + button
Increase volume or go
to next track
9. Talking mic
1
2
3
4
5
6
8
9
7
Charging the Headphones
It takes approximately 1.5 hours to fully charge the battery.
1. On first use, or when you hear “Battery Low”, you
need to charge the headphones.
2. Use the USB charging cable to connect the
headphones to your computer. The red indicator light
will stay on during charging.
3. When the battery is fully charged, the red indicator
light will wink out and the blue indicator light will
stay on. Remove the USB charging cable.
Pairing for the 1st Time
To pair headphones that have never been paired with a
Bluetooth device before, please follow the steps below:
1. Switch on the headphones by pressing and holding
until you hear “Power on” and “Pairing”. The
headphones are now in pairing mode.
2. Activate the Bluetooth feature on the mobile phone
or music player, and set it to search for new Bluetooth
devices.
3. Select “GINBT14” on the mobile phone or music
player. Some mobile phones list an option to “play
through headset”. Select to use the headphones.
• Attention should be given to the environmental
aspects of battery disposal.
• Batteries (battery pack or batteries installed) must not
be exposed to excessive heat such as sunshine, fire or
the like.
4. If necessary, enter the passcode, “0000”, to pair and
connect the headphones. Some device also ask to
confirm the headset connection after pairing.
5. When pairing and connection is successful, you will
hear “Connection successful”.
• To pair with another mobile phone, follow the steps
for “Pairing for the 1st Time”. After pairing successfully,
restart the headphones to connect to the 2 paired
mobile phones automatically.
• If the headphones cannot pair successfully, switch off
the headphones. Repeat from step 1.
GINBT14_IB_RC_Final140328.indd 5-7
28/3/14 6:09 pm
