Goelst G-Motion, Руководство пользователя

Страница: 32 / 44

28
4 Programming
English
2x flash = Inverted 2-button operation
3x flash = 1-button operation
6. Confirm and store setting by shortly pressing
OPEN
+
CLOSE
buttons.
7. The LED on the motor unit flashes white at high speed again for 15 seconds: using
the OPEN or CLOSE buttons another MENU 3 feature can be selected.
8. Otherwise, wait for 15 seconds or shortly press the OPEN + CLOSE buttons to quit
programming.
The LED on the motor unit switches off, the system is ready to use.
To quit programming at any time, repeatedly press the OPEN
+
CLOSE buttons or wait for 15s.
Changes made at 5 will only be saved if confirmed by pressing the OPEN + CLOSE buttons .
3.2 Inverted input
Reverse the rotation of the motor unit:
OPEN
becomes
CLOSE
and vice versa.
After 15s. without input, the motor unit quits programming mode.
Please read the steps of this feature first before starting.
SET Inverted input
motor LED colour green:
1. Press and hold the
OPEN
+
CLOSE
buttons until the LED on the motor unit flashes
white at high speed (after ~12s.)
(First the LED will turn white continuously, then flashes white slowly, keep pressed
until the LED flashes white at high speed)
2. Repeatedly press OPEN or CLOSE until the LED on the motor unit is green.
3. Shortly press the OPEN + CLOSE buttons to enter the feature menu,
4. The LED on the motor unit now flashes green at the current setting:
5. Cycle through the options below using
OPEN
or
CLOSE:
1x flash = Normal input (Default)
2x flash = Inverted input
6. Confirm and store setting by shortly pressing OPEN + CLOSE buttons.
7. The LED on the motor unit flashes white at high speed again for 15 seconds: using
the
OPEN
or
CLOSE
buttons another MENU 3 feature can be selected.
8. Otherwise, wait for 15 seconds or shortly press the
OPEN
+
CLOSE
buttons to quit
programming.
The LED on the motor unit switches off, the system is ready to use.
To quit programming at any time, repeatedly press the OPEN
+
CLOSE buttons or wait for 15s.
Changes made at 5 will only be saved if confirmed by pressing the OPEN + CLOSE buttons .