Godex EZ-2000 PLUS, Руководство пользователя

Страница: 54 / 78

4-4. Self-Test
The Self-Test function will help user to check whether the printer is operating normally. In
Self-Test Mode, the printer will print out a test sample each time when the FEED key is pressed.
To break off the Self-Test procedure, please power off the printer.
Below are the Self-Test procedures:
1.
Power off the printer, press and hold the FEED key.
2. Power on the printer (while still holding the FEED key); release the FEED key after hearing
3 beeps.
3. After about 1 second, printer would automatically print out the following, and the LCD
Display would show “Self Test.” This means the printer is operating normally.
EZXXXX : VX.XXX
Serial port :96,N,8,1
int-usb Sw Setting: ext-USB
1 DRAM installed
Image buffer size : 4020K
000 FORM(S) IN MEMORY
000 GRAPHIC (S) IN MEMORY
000 FONT(S) IN MEMORY
000 ASIAN FONT(S) IN MEMORY
000 DATABASE(S) IN MEMORY
000 TTF(S) IN MEMORY
1308K BYTES FREE MEMORY
^S4 ^H10 ^R000 ~R200
^W100 ^Q89,3
Option : ^D0 ^O0 ^AD
Gap Sensor AD : 129 162 195 (3)
Code Page: 850
Keyboard Layout : US-International
Top of Form: ON
Max Print Length (mm): 4572
Model & Version
Serial port setup
USB port setting
Test pattern
Number of DRAM installed
Image buffer size
Number of forms
Number of graphics
Number of fonts
Number of Asian fonts
Number of Databases
Number of Scalable Fonts
Free memory size
Speed, Density, Ref. Point, Print direction
Label width, Form length
Cutter, Stripper, Mode
Sensor Setting
Code Page
Keyboard Layout
Top of Form function on/off
Maximum printing length
Self-Test includes the internal printer data setting.
EZ-2000+/6000+ User’s Manual
53