I S A – S p e c t r u m V i s u a l
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 49 / 76
www.go-sys.de
11.2 Enter and Delete Probe Numbers
Click on
in the vertical button bar opens a window for entering a probe number
∗
for a blue marked spec-
trum. You can also double-click in the spectra list.
Here you can allocate a
probe number
∗
to a marked spectrum, entered commas are saved as point. A spec-
trum with probe number is a
reference spectrum
and is red marked in the spectra list.
You delete a probe number by clicking on <OK> without input.
∗
Also called probe name or sample number. Character set: Standard ASCII
The probe number is required for an application specific calibration in connection with a multi-parameter calibration, and is
stored in the JCAMP-DX format together with the spectral data.
see
Manual ISA and Process Spectrometer Commissioning - Maintenance - Service
there
4.3 Application-Specific Calibration
